Ramset

The nose of the T3 has been specifically engineered to allow the tool to easily reach into 1 5/8” x 2” deep track at any angle. The newly designed nosepiece, point collation, and patented pin-feed mechanism allows for easy fastening without jamming.

With the T3’s 1/2 steel pin you can even shoot into the web of steel.

Shoot directly into the web of steel effortlessly. The T3 steel pin has the guts to take on the toughest jobs while eliminating head pops. The secret is the design of the .125 diameter pin. The T3 pin can handle the toughest steel substrates…even red iron. Coupled with the energy of the T3 tool, it virtually fuses the pin to the steel.

Settling aggregate is the biggest reason for overhead pin failure.

More cities are rehabbing old structures into new. Old warehouses are prime conversion targets for these developments. Concrete that has cured for more than 40 years would normally need to be drilled. The power of T3MAG and the unique design of the premium step shank pin can tackle even the hardest or most brittle concrete.

Even though the T3 has enough power to fasten into hard concrete and steel it still will not blow through hollow block.