About Ramset | P.A.T. Licensing | Contact Us | Terms & Conditions
 

or go to the Advance Search

TrakFast
Still the most revolutionary fastening system in the construction industry! Since its introduction in 1991, TrakFast has been the tool of choice for both interior and exterior contractors. The TrakFast Automatic Fastening System fastens all types of track, from standard track to hat channel, deep leg, Z, and J channel. Contractors continue to report tremendous savings when using TrakFast for high production fastening. They have learned that TrakFast’s actual cost in place beats all other systems. The increased speed and productivity of TrakFast allows the contractor to bid more competitively, complete the job sooner and move on to the next job. Anyone can use TrakFast—just load the pins and fire. It’s that easy!
TrakFast’s power comes from the battery and fuel cell The 6-volt rechargeable Ni-CD battery can drive approximately 3000 shots per charge. The clean burning fuel cell can drive over 1000 pins and keeps the tool cleaner than powder actuated tools.
Fastening System Productivity In the time it takes you to drive two pins with a powder tool, you can drive up to 10 pins with TrakFast!
MOST COMMON FASTENERS
PIN LENGTH
PIN #
INCHES
MM
MOST COMMON APPLICATION
|  FPP012S
1/2
12.7
Track to steel
|  FPP034B
3/4
19.1
Track to concrete
 
 
Track to steel

Lath attachment—using one-inch TrakFast discs and magnetic probe adapter

Furring attachment—perfect fastening every time in soft and hard base materials
Plywood attachment—using TrakFast plywood to steel pin
Track to concrete